AEV WINCH MOUNT 2021+ COLORADO ZR2 Manuel d'installation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} AEV WINCH MOUNT 2021+ COLORADO ZR2. AEV WINCH MOUNT 2021+ COLORADO ZR2 9 pages.
Imprimer la page
7.
Trim the upper, inside corners of the factory foam and around tow hooks (fig. 10)
8.
Reinstall Factory Grill support.
9.
AEV recommends Warn Cradle mount 89990. This comes with Anderson connectors to wire winch.
Refer to Warn Installation Instructions.
10. Route Power and ground from Anderson connector below plastic fascia support, up below headlight
and to battery (fig. 11). NOTE: do not connect battery yet!
11. Reinstall OEM Fascia
12. Reinstall Front Skid Plate. NOTE: If using AEV's Front License Plate Mount (PN: 18060015), follow mount-
ing instructions for that product first.
13. Install Winch Closeout panel to vehicle using four M6 x 30 BHCS, torque to 7 lb-ft
A M E R I C A N
E X P E D I T I O N
TRIM FOAM
Figure 10
Figure 11
V E H I C L E S
5