Freedom ELECTRONICS Ovation 2 FE-24 Manuel d'installation - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Freedom ELECTRONICS Ovation 2 FE-24. Freedom ELECTRONICS Ovation 2 FE-24 10 pages.
Imprimer la page
FE-24 Printer
22. Program printer communication:
• DW-14 replacement – no
programming is required.
• Zebra replacement - Go into the
iX configurations while the
dispenser is booting up and set the
printer to work as if it is a DW-14.
Select NO for Zebra. Make sure to
leave the other settings the same.
23. Load paper by inserting it into the
printer. The printer should auto-feed
the paper.
24. Press the diagnostics button on the
FE-24 PCB to print out a Freedom
Electronics diagnostic report page.
25. Run a printer test from the dispenser
diagnostics.
25. Run a test transaction to verify proper
operations.
26. Close and secure the dispenser and
printer door.
27. Check with clerk inside to make sure
there are no printer errors on the POS
system.
Freedom Electronics: FE-24 Install
Diagnostics button
8