Freedom Innovations Kinnex 2.0 Manuel d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Freedom Innovations Kinnex 2.0. Freedom Innovations Kinnex 2.0 11 pages. Prosthetist
Également pour Freedom Innovations Kinnex 2.0 : Manuel d'utilisation du patient (2 pages), Manuel de configuration (2 pages), Manuel de référence (2 pages)
Imprimer la page
Changing Footwear/Shoe Selection
The Change Footwear Button will allow you to manually
change your footwear without use of the Kinnex App:
Follow these steps to manually change shoes.
1. Don Kinnex with new footwear.
2. Press and hold the Change Footwear Button until
the indicator light in the button begins to flash
white.
3. Once the white indicator light begins to flash, stand
with toes even and with feet
shoulder width apart.
4. Remain still until the white indicator light stops
flashing. (Usually takes <5 seconds.)
5. If Kinnex ankle cannot adjust within 10 seconds it
will indicate an error condition by alternating
flashing of the white and red indicator lights. The
error light indicator will flash for 15 seconds or until
the change shoes button his pressed and released.
Manual Lock
The Manual Lock feature is designed to assist with
driving a car, putting on clothes or footwear, or any
activity where a fixed ankle position is desired. When
active, Kinnex will stay in the current position until a
double-press of the change shoes button is used, or the
manual lock is switched off in the app.
To manually engage the Manual Lock:
1. Move Kinnex to the desired orientation.
2. Press the Change Footwear Button twice quickly.
3. The Change Footwear Button white indicator light
will turn on while Kinnex is in Manual Lock mode.
4. Perform the desired activity.
5. Press the Change Footwear Button twice quickly to
disengage the Manual Lock.
6. The white indicator light will turn off upon
completion.
Caution:
Engaging the Manual Lock feature for driving
is required. Leaving the Manual Lock engaged can
result in unintentional loss of stability if user forgets
ankle is locked.
When the battery is completely depleted the Manual Lock
feature is not available, and driving is NOT recommended.
12
Freedom Innovations |
Long-Term Storage Mode
If Kinnex needs to be stored for more than 60 days, it should
be put into long-term storage mode to avoid over discharge
of the battery pack.
To put Kinnex into long-term storage mode:
Press and hold both the Change Footwear and the
•
Bluetooth Buttons simultaneously for 6 seconds.
After 6 seconds, all three lights will flash on and off
•
simultaneously as an indicator that the command was
successful.
After the lights turn off Kinnex will enter into longer
•
term storage mode and power off.
To bring the ankle out of long-term storage mode:
Charge the battery as you normally would by removing
•
the rubber plug from the port at the top front of the
ankle and connect the wall power supply provided
with Kinnex.
The green indicator light at the front of the ankle will
•
begin to flash indicating that the ankle is charging
and powered on.
Kinnex 2.0
| Instructions for Use
13