AudioEngine D2 Manuel de configuration - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} AudioEngine D2. AudioEngine D2 8 pages. Premium 24-bit wireless dac
Également pour AudioEngine D2 : Fonctionnalité (3 pages)

Imprimer la page

Cleaning

Your D2 components are not water-resistant, so it's important that they

should be kept free of moisture. You should clean only with a dry cloth

or tissue and no liquid cleaners or solvents should be used.

Features

•

Wireless bit-perfect 24/96 digital-to-analog converter

•

USB-to-S/PDIF converter (wireless)

•

Mac or PC plug-and-play, no drivers or network setup

•

Precision re-clocking for low jitter

•

USB and optical inputs

•

Optical and RCA analog outputs

•

Based on Burr-Brown PCM1792 DAC

Overview

The D2 24-bit Wireless DAC

is a simple yet powerful

wireless digital-to-analog

converter with performance

and features generally found

only in much more expensive

DACs. It can accept USB or

PCM-stream optical inputs, and will automatically configure to match

the inputs you deliver, with the optical input being dominant. The

wireless operation is totally transparent, requiring no special network

setup or drivers.

D2 setup guide

Optical Input

USB Input

Power

1.0A

Power

Pair

Output Level

Wireless DAC Sender

Analog Output

Optical Output

Power

1.0A

Power

Pair

Left

Wireless DAC Receiver

Right

The D2 can process digital audio at any bit depth up to 24 bits, and

any sample rate up to 192KHz. The D2 USB input can accept a USB

audio stream from your computer or other USB source device. The D2

optical input can accept optical (PCM stereo) streams from any optical

(TOSLINK) source, such as computers, TVs, Apple TV, DVD/BluRay

players, CD players, etc.

Note: Optical sources must be set to PCM Stereo.

The D2 Receiver output can be connected to any gear with an analog

(RCA or minijack) audio input, such as powered speakers, stereo

system, etc.

The D2 Receiver also includes an optical output, which can be used to

connect your own DAC or stereo receiver. Thus the D2 system can act

as a wireless USB to S/PDIF converter, as well as a wireless optical link!

Power for the D2 Sender can be provided via USB or the included

power adapter.

Note: Use only the provided Audioengine power adapter. The

Audioengine adapter is specifically designed for maximum audio

performance, and the use of other adapters may damage your D2.

Note: When using the D2 with the optical output of your computer,

the USB port on the computer can provide power. The D2 will sense

that an optical input is present and give that input priority.

Internally, USB power is "double regulated" to ensure that no USB bus

power variations affect the audio.

The D2 Sender can simultaneously broadcast to (3) D2 Receiver units.

See the Pairing section for pairing additional receivers.