Casio MZ-X300 Manuel de l'utilisateur - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Casio MZ-X300. Casio MZ-X300 20 pages.
Imprimer la page
■ Addition of a user tone wave preload function
(Both MZ-X500 and MZ-X300)
A function is added that preloads the wave(s) of one or more user tones (preload tones) when power is turned on.
When you switch to a user tone that was created with Sample Manager using a tone that exceeds the recommended
size, there may be some delay before the user tone becomes available after you select it because of the time required
to load its waveform. This delay can be eliminated by preloading the tone.
Use the procedure below to configure preload settings.
1.
Display the SYSTEM SETTING screen.
2.
Touch "Preload Setting" to display the PRELOAD SETTING screen. The "Free Space" value shows
how much memory capacity is available.
3.
Touch "Preload Enable" so it turned on.
4.
Touch "Tone Select" to display the PRELOAD TONE SELECT screen. This screen shows the size of
the wave of each user tone.
5.
Touching a user tone selects it as a preload tone. Multiple user tones can be selected. Touching a
selected tone deselects it.
6.
The preload settings you configure will be applied the next time power is turned on.
• You can change how preload tones are combined by changing the "Preload Set" setting on the PRELOAD SETTING
screen.
• Note that the preload tone selected/unselected status is saved and loaded by All Data (ZAL) operations.
• If Free Space is low, there may be some delay before some non-preload tones becomes available after they are switched
to. If this happens, deselect some preload tones to increase the amount of Free Space available.
■ Modification/addition of pad playback items
(Both MZ-X500 and MZ-X300)
Setting items for pad playback are modified and added with this version.
Item
Phrase Tone Enable
Reflects a tone recorded for a phrase when the phrase is
played with a pad.
Part
Selects the part to play back the phrase. Multiple parts can be
selected for this setting.
Timing Sync
Synchronizes phrase playback timing of a tapped pad with
Auto Accompaniment or another pad's (phrase or chord)
playback timing.
Timing Sync
Synchronizes chord playback timing of a tapped pad with
Auto Accompaniment or another pad's (phrase or chord)
playback timing.
Description
Phrase Setting Items
Chord Progression Setting Items (MZ-X500 only)
16
Settings
Off, On
B-X, A-01 to A-16 (B-X can be used for
PAD 1 through 8 only. X is fixed as 09
to 16 for each pad.)
Off, Beat, Measure
Off, Beat, Measure