Danguard HS-400 Manuel de l'utilisateur - Page 15
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Danguard HS-400. Danguard HS-400 17 pages.
Imprimer la page7. Operating with iOS devices
Setting the Push Notification
Go to the Main Menu -> System -> Network
-> Push notification. in the menu item „Enab-
le / Disable", you can set the push notification
on or off. By „minimum time interval", the time
delay of a push notification can be set.
Note:
Only if the motion detection and/or heat
detection in the menu item „Recording"
is enabled, a push notice may be served.
Click at the Android app to „push notification settings" to register an account. When motion is
detected by the camera, it sends a push notification to your phone.
Important notes:
1. Only when the receiver in the real-time state, to view the image.
2. If the Device ID was unable to get to the monitor, indicates that monitor did not normally
connect outer net, need to check your network.
3. If everything is normal, but still not in the mobile phone client to view images, please close the
client software running always in the background, please try it again.
4. The network adapter does not support hot-swappable, before open the monitor, The network
is connected with the monitor.
28
ENGLISH
8. Specifications
Camera
Imaging Sensor ......................................1/5 inch Color CMOS
Video resolution .....................................656 x 488
Viewing angle .........................................50 °
Power supply ..........................................5 volts
Current consumption .............................max. 500 mA
IP degree of protection ..........................IP66
Night vision distance ..............................max. 20 m
Dimensions (W x D x H) .........................164 x 81 x 172 mm (including bracket)
Weight ....................................................686 g
Monitor
LCD screen .............................................7 inch TFT LCD
LCD screen resolution ...........................800 x 480
SD card support .....................................up to 32 GB
Hard Drives supported ...........................up to 1 TB
Video frame rate .....................................max. 30 fps
Video resolution .....................................CIF / VGA
Video format ...........................................AVI
Data output ............................................USB 2.0
Power supply ..........................................5 volts
Current consumption .............................max. 700 mA
Dimensions (W x D x H) .........................214 x 157 x 26 mm
Weight approx ........................................492 g
Range .....................................................up to 300 m
Operating temperature ..........................-10 ° C ~ + 50 ° C
Humidity .................................................15 ~ 85% RH
* All specifications are subject to minor changes may be made without notice.
Imortant notes:
• Turn off the system when not in use.
• This product can only be completely disconnected from the power supply by removing the
power supply.
• Do not cut through the power cable of this product to make it operate with a different power
source.
ENGLISH
29