Daniamant L7A Instructions d'installation et d'entretien - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} Daniamant L7A. Daniamant L7A 4 pages. Lifejacket light

Daniamant L7A Instructions d'installation et d'entretien
Safety
L7A lights contain Lithium cells. These must be handled correctly:
Do not dismantle battery pack
Do not make any external electrical connection
Do not recharge
Do not incinerate
Store between –30º C and +65º C
Health and Safety information
Daniamant lithium-powered marine safety light systems have a design life of 5 years. The batteries are
hermetically sealed pressurised primary Lithium/Manganese cells, and as supplied are electrically
protected by a solid state device, and are environmentally protected by a moulded plastic housing. In
this condition the units pose no definable hazard to health.
Information on the composition and behaviour of these products is contained in the Product Safety
Data Sheet, available from our website (www.daniamant.com) or on request.
LIGHT
SENSOR MUST BE POSITIONED SO AS TO BE IMMERSED IN WATER DURING USE
POSITION OF L7A ON LIFEJACKET
HOUSING ASSEMBLY
3