Conqueror CIL-BD800S Manuel du propriétaire - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Conqueror CIL-BD800S. Conqueror CIL-BD800S 14 pages. Chain and belt openers

Imprimer la page

www.conquerordoors.com

3. Briefly press + or – to adjust the closing sensitivity from 0 to 9 (default 3)

4. Press P to confirm and enter the next setting

Safety Beam Setting

•

1. Press & Hold button P until A is displayed

2. Scroll to

3. Briefly press + or – to set the safety beam from 0 to 2 (default 0)

0: No Safety beam, 1: Activate safety beam during door closing, 2: Activate safety beam during

door closing and opening

4. Press P to confirm and enter the next setting

Auto Closing Time

•

1. Press & Hold button P until A is displayed

2. Scroll to

3. Briefly press + or – to set the auto closing time from 0 to 9 minutes (default 0)

4. Press P to exit

Transmitter Code Learning

•

1. Press & Hold button – until

2. Press a transmitter button once, '.' slowly flashes

3. Press the same transmitter button once again, '.' quickly flashes for 2 seconds and off

Transmitter Code Deleting

•

1. Press & Hold button – until

2. Release the button, all the transmitter codes is deleted.

Transmitter Button Function Setting

•

1. Press & Hold button P until

2. Briefly press + or – to set the transmitter button function from 0 to 2 (default: 1)

0: Tx button A is for opening the door, Tx button B is for closing the door

1: One Tx button controls the door

using P button

is displayed

appears, keep hold button – until '.' Disappears

is displayed