Daniamant Dan WL3-2 Instructions d'installation et d'entretien - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'entretien pour {nom_de_la_catégorie} Daniamant Dan WL3-2. Daniamant Dan WL3-2 4 pages. Lifejacket light
Imprimer la pageInstallation
The WL3-2 is a Leisure and Inflatable Lifejacket version of the W3 Light. It is the
responsibility of the lifejacket owner to ensure that the light is attached securely
and is in the correct position on the lifejacket to provide maximum visibility when
the wearer is in the water. Place the unit on a strap and insert the clip from below
until it locks in place.
Clip part no.1960
Operation
The DAN WL3-2 is switched on automatically when the sensor is immersed in
water and can be switched off by pressing the on/off button.
The light can also be activated and deactivated manually by pressing the on/off
button. The Cable Sensor can be tested by a metal paper clip.
Sensor
Switch
ON/OFF
Button
Figure depicts the Sensor Switch and the Manual ON/OFF Button
2