Audiolab 8300A Instructions pour l'utilisateur - Page 8
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Audiolab 8300A. Audiolab 8300A 13 pages.
Également pour Audiolab 8300A : Instructions pour l'utilisateur (13 pages)
Imprimer la page
6: Operation - 2
Operating Modes
Although 8300A is an integrated amplifier, it can function as a separate pre-
amplifier and power amplifier. Rotate the MODE knob on the front panel to select
different operating modes.
NOTE: When switching modes, the making and breaking of connections may
momentarily operate the muting function on the 8300A.
MODE
POWER AMP IN
PRE-AMP OUT1&2
PRE
DISABLE
PRE-POWER
ACTIVE
INTEGRATED
DISABLE
Integrated mode
The pre-amplifier section is internally connected to the power amplifier. Pre-Amp
outputs are not operational. External subwoofers, processors, or amplifiers will not
receive any signal.
PRE-POWER
LOUDSPEAKERS
INTERNAL LINK
ACTIVE
DISABLE
DISABLE
ACTIVE
DISABLE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
Pre-Power mode
The pre-amplifier outputs are operational. A second power amplifier can be connected for
bi-amplifying as shown in the diagram. An additional power amplifier can also be connected
to drive a second pair of speakers.
Pre Mode
All signal to and from the power amplifier of the 8300A are disconnected. In this mode, the
8300A functions as a stand-alone pre-amplifier.
The pre-amplifier section of the 8300A can be connected to a stereo power amplifier, or to
two monobloc amplifiers
Page 7