Audiolab 8300CDQ Instructions pour l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisateur pour {nom_de_la_catégorie} Audiolab 8300CDQ. Audiolab 8300CDQ 17 pages.
Imprimer la page
5HPRWH +DQGVHW
NOTE: the handset buttons shown crossed out are for use with other
Audiolab units and are not operational when used with the 8300CDQ
1 STANDBY
Press to bring the unit in/out of Standby
2 STORE
Press to store a track in Program mode
3 RANOOM
Press to select ranoom mode
4 MENU
Press to enter menu mode
5
Move to the next track of CD/USB
Move to next menu page or setting
6 VOL–
Decrease Volume
7
Press and hold to Fast Reverse
8
Press and hold to Fast Forward
9 FILTER
Press to select a digital filter
10
DISPLAY Press to toggle the display on/off
Press and hold to select display brightness levels
11 INFO
Press to toggle track name or artist name
12 N
Press to select 8300N remote mode
13 A
Press to select 8300A remote mode
14 CD
Press to select 8300CDQ remote mode
15 TIME
Press to toggle track time remaining and elapsed
16 SOURCE
Press to cycle source inputs
17
Press to eject/load the disc
18
Press to stop CD
19
Press to start/pause CD/USB playback
Press to next menu page or setting
20
Press once to replay the current track of CD/USB
Press again to move to the previous track of CD/USB
Move to last menu page or setting
21 VOL+
Increase Volume
22 REPEAT
Press to select a repeat mode
23 PROG
Press to program tracks of your choice
24 NUMBER KEYS
Press to go directly to a track by number
25 MUTE
Press to mute and unmute the sound
Page 5
Fitting Batteries
Open the cover, unwrap the supplied AAA batteries and
place them in the battery compartment with the polarity as
shown, replace the cover.
Always use AAA batteries and always replace them in sets.
Never mix old and new batteries. Very weak batteries can
leak and damage the handset. Replace them in good time!
There is a risk of fire and burns if a battery is handled
improperly. Do not disassemble, crush, puncture, short
external contacts, or dispose of in fire or water.
Do not attempt to open or service a battery. Discard used
batteries in full accordance with recycling regulations in
force in your area.
Handset Operation
The handset operates several Audiolab components. The
handset buttons shown crossed out are for use with other
Audiolab units and are not operational when used with the
8300CDQ.
Point the handset at the remote receiver and press the
relevant key. The handset should be within 15 meters of the
player and there must be a clear line of sight between the
two units.