Casio DG-20 Manuel du joueur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel du joueur pour {nom_de_la_catégorie} Casio DG-20. Casio DG-20 11 pages. Digital guitar
Également pour Casio DG-20 : Manuel du joueur (12 pages), Manuel du joueur (11 pages)

Imprimer la page

CHANGING STRINGS

Move

Press Down

1. As shown in the above diagram,

press down on the sensor cover

and move it toward the neck.

not use excessive force on

any parts in the sensor assembly.

Pull String Through Notch and Hole

2. As shown in FIG-1 above,

strings pass through a notch in the

end of the sensor, and then

through a hole in the sensor. After

pulling through a few inches of

string, tie the string as shown in

FIG-2. Next, fix the string tight and

cut off any excess.

3. Insert the accessory hex

wrench (large) into the head and

turn it counter-clockwise to slide

the headpiece towards the body.

Next, insert the other hex wrench

(small) in the headpiece and

loosen the screw.

4. Next, pull the string through

the hole in the headpiece and

tighten the headpiece screw while

pulling the string taut.

Using the large hex wrench, move

slide the headpiece back into

position to adjust string tension.

Avoid tightening the strings

excessively, as this may lead to

neck warps or other damage.

Also, do not use excessive force

on the neck.

Follow the same procedures to

change all 6 strings.