AUDIOLINE Baby Care 16 Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AUDIOLINE Baby Care 16. AUDIOLINE Baby Care 16 17 pages. Baby monitor with digital, noiseless radio communication
Imprimer la page
Starting Up
3 Starting Up
Safety notes
a
It is essential to read the "General Information" at the beginning of this manual before starting
up.
Checking the package contents
The package contains:
1 Parent unit (receiver)
1 Baby unit (sender)
2 mains adapters with power cord
Parent unit
1. Plug the power cord into the power input on the rear side of the device and plug the adaptor
plug into a mains power socket.
2. Press and hold down the Power Key to turn the device on if necessary.
Inserting the batteries (optional)
Remove the battery cover on the rear of the device by applying pressure and sliding it down.
Insert the batteries (3 x AAA alkaline) as marked on the unit and close the cover again.
Baby unit
1. Plug the power cord into the power input on the side of the device and plug the adaptor plug into
a mains power socket.
2. Press and hold down the Power Key for approx. 3 seconds to turn the device on if necessary.
a
Note: The baby unit should be placed about 1 m to 1.5 m away from the baby's cot on a flat
surface.
Never place the baby unit inside the cot, bed or playpen. Make sure the unit, cords and mains
adaptor are out of reach of the baby and other young children. Never place either unit on antique
or polished surfaces.
GB
9