AUDIOLINE Watch&Care V132 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} AUDIOLINE Watch&Care V132. AUDIOLINE Watch&Care V132 12 pages. 2.4ghz babyphone
Imprimer la page
Putting the unit into operation
Registration
For operation you will have to register your transmitter (camera) to
your Audioline Watch&Care V130/132:
1
Switch the transmitter off (switch set to OFF). Remove the
batteries of the receiver for a few seconds if necessary.
2
Switch the receiver on.
3
Press the menu key repeatedly
the display.
4
Use the
[C4].
5
Press the
prox. 10 seconds. During this time, you must perform steps 6
and 7.
6
Switch the transmitter on (switch set to ON).
7
Press the registration key on the rear of
the transmitter. After a short time the
video from the transmitter will appear
on the screen if the registra tion was
successful.
If the registration failed, "Out of Range"
appears on the screen.
buttons to select the desired camera [C1] ...
button briefly. The Link LED flickers for ap-
until [C1] appears in
7