Danita 2000MULTI Manuel de l'utilisateur - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Danita 2000MULTI. Danita 2000MULTI 16 pages. 27 mhz cb radio

Imprimer la page

Country Selection

When danita 2000Multi is turned on, the display ﬂash with

two digit. 06 may be used in all countries. To change coun-

try selection, press UP knob for 3 second, when danita

2000Multi is turned ON. Select with UP/DN knobs. Keep

DN knob pressed for 3 second for store new country.

Choose 06 for the following countries: AT, CH, CZ, DE,

DK, GB, HU, IS, LT, LU, LV, NO, PT, SE, SI, SK and SR.

Choose 05 for these countries: BE, EE, ES, FI, FR, GR,

IE and NL.

See the manual, danita 2000Multi Country Selection, for

more information. Also for DE, GB, IT and PL.

How To Use danita 2000 Multi

Ensure the connection of a suitable antenna and make

sure power is on. Set the volume control to about medium

and turn the squelch control until the noise just disappear.

Hold the microphones about 2" from your mouth. Press the

microphones transmit button, and speak clearly. Release

transmit button, and listen to the other part.

Service

If your transceiver does not work properly, ﬁrst check that

all controls are set as instructed in the manual. If this does

not change the situation, do not attempt to ﬁx the transceiver

yourself, but take the unit to your dealer. Please enclose a

short description of the fault.

To clean the transceiver just use a damp cloth.

Important!

The device is not to be discarded through regular waste

disposal. Instead please dispose of it in a responsible

manner, e.g. at a recycling centre.