Conrad-Johnson MF2100 Manuel du propriétaire - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Conrad-Johnson MF2100. Conrad-Johnson MF2100 9 pages.

pecifications:

Power: 240 watts per channel RMS (MF2300), 200 watts per channel

RMS (MF2200) and 100 watts per channel RMS (MF2100) both chan-

nels driven into 8 ohms from 20Hz to 20KHz at no more than 1% total

harmonic distortion or intermodulation distortion.

Sensitivity: MF2200 & MF2300 2.0 V to rated power.

Phase: Phase correct (non-inverting)

Frequency response: 20Hz to 20KHz +0, -.25dB

Hum and noise: 98dB below full power output.

Input impedance: 100K ohms.

Dimensions: MF2300 16.875D x 19W x 6.75H inches

Weight: MF2300 57 lbs., MF2200 47 lbs., MF2100 28 lbs.

Fuses: There are 5 fuses in the MF2000 Series Amplifiers. One is the

ac power line (mains) fuse. It is located in a fuse holder near the power

cable. The other four fuses are in the main DC power supplies. On the

MF2200 and MF2300, these are located in fuse holders near the output

jacks, labeled B+ and B-. On the MF2100, these DC power supply fuses

are inside the chassis on the printed circuit board. Never replace a fuse

with a value or type different from that originally supplied by the

factory. Correct values and types are listed below. In the event of a fuse

blowing repeatedly, contact your dealer or the conrad-johnson service

department.

MF2100

MF2200

MF2300

MF2000 Series Owner's Manual

MF2100 1.6 V

MF2200 16.875D x 19W x 5.20H inches

MF2100 13.875D x 19W x 4.31H inches

100/120 V mains

(220/240 V mains)

5 amp, slo-blo

(3 amp, slo-blo)

10 amp, slo-blo

(7 amp, slo-blo)

10 amp, slo-blo

(7 amp, slo-blo)

B+/B-

4 amp fast-blo

5 amp fast-blo

6 amp fast-blo