Addonics Technologies AEMEDUSIB25UW Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Addonics Technologies AEMEDUSIB25UW. Addonics Technologies AEMEDUSIB25UW 18 pages. Combo hard drive & mobile rack

Imprimer la page

Connecting the HardDrive25 to the Motherboard USB header

Cable Installation

Red: + 5V / Voltage + / VCC

White: USB - / Data - / D -

Green: USB + / Data + / D +

Black: GND / Voltage - / Ground

1. On most motherboards, the USB header consists of 9 pins

arranged in 2 rows; and each header allows for 2 USB

connections (i.e. USB1 and USB2). Normally, the pins for

USB1 and USB2 are in separate rows.

2: Simply plug the connector onto the header of the

motherboard pins, in such that; the wires are correctly

connected to the appropriate pins (i.e. wire assignments and

pin assignments are matched).

3. Connect the USB male end connector from the drive to the

female end connector coming from the motherboard.

Please check the motherboard documentation for the correct

header pin out of your USB port.

Addonics Technologies – Combo Hard Drive USIB25 Users Guide v1.0

To the

Motherboard

header.

To the USB

Interface Cable

Connector