Addonics Technologies AERD25SN35 Manuel de l'utilisateur - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Addonics Technologies AERD25SN35. Addonics Technologies AERD25SN35 4 pages. Snap-in 25 raid
Imprimer la page
Using the Mode Switch
The unit will only set up a RAID or LARGE array if it is currently set for
independent drives (Mode Switch set to "Nor"). If an array is defined and a
different array setting is desired, the unit must be powered up one time with
the Mode Switch set to "Nor" before a new array will be created. Otherwise,
simply set the switch to the desired setting and power up the unit. Leave the
Mode Switch set to the desired array type.
NOTE:
Setting or modifying the mode destroys all data.
Using the JMicron RAID Manager
Windows users may install the JMicron HW RAID Manager application
located on the SATA Controller CD, or download it from
http://addonics.com/drivers/driver_list.php. In the CD, browse to Configura-
tion Utilities → JMB393.
Mac and Linux users may download those versions of the same utility from
http://addonics.com/drivers/driver_list.php under "Port Multiplier & Hub."
The JMicron RAID Manager can be used to monitor the health status of the
RAID drives, and provide status alerts with dialog boxes and even email.
Using the JMicron RAID Manager to create or modify an array is NOT
recommended. The Mode Switch should be set to the desired type of array at
all times to prevent data loss.
CONTACT US
www.addonics.com
Phone:
Fax:
Email:
408-573-8580
408-573-8588
http://www.addonics.com/sales/query/