ConSenses Accelerometer BA Series Manuel d'instructions de montage - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} ConSenses Accelerometer BA Series. ConSenses Accelerometer BA Series 14 pages.

Imprimer la page

3.4. Supplementary Safety Precautions

As passive sensors, accelerometers cannot perform any safety-relevant functions. This requires additional

components and equipment for which the installer and operator are responsible. Electronics that process such

a measurement signal must be designed in such a way that no consequential damage can occur if a measure-

ment signal fails.

In the event of a fault, in which persons or property may be harmed by loosening or malfunctioning of the

product, the user must take precautions to ensure a safe operating state. Such precautions can be imple-

mented, for example, by means of separating or non-separating protective devices or the like and must at least

meet the requirements of the relevant accident prevention regulations.

3.5. General Hazards due to Non-observance of the Safety Instructions

The accelerometers correspond to the state of the art and are operationally safe. There are residual risks as-

sociated with improper use. For this reason, every person who is entrusted with the installation, commission-

ing, and dismantling of the sensor must read and understand the operating instructions and, in particular, the

safety instructions.

Improper use of the accelerometer or failure to observe the safety regulations can result in damage, malfunc-

tion, failure, or loosening of the accelerometer. In particular, loosening the accelerometer can cause damage

to property or persons in the vicinity of the accelerometer.

The scope of services and delivery of the product covers an accelerometer up to the standardized connection

and is only part of the measurement chain. Safety-related aspects of the measuring chain must also be planned,

implemented, and accounted for by the system planner/supplier/operator in such a way that residual risks

are minimized and identified. Existing regulations must be observed.

3.6. Modifications and Change

The product must not be modified without the express consent of the manufacturer. Any change excludes the

manufacturer's liability for any resulting damage.

Accelerometer Assembly Instructions

Page 5