CONSET BSR 105 Instructions pour l'utilisation et l'assemblage - Page 13
Parcourez en ligne ou téléchargez le pdf Instructions pour l'utilisation et l'assemblage pour {nom_de_la_catégorie} CONSET BSR 105. CONSET BSR 105 13 pages. Electric height adjustable changing table
Également pour CONSET BSR 105 : Instructions d'utilisation et d'assemblage (14 pages)
Imprimer la page10.
SERVICE FAQ
-
If the table not will move when activating the up/down buttons do the following;
Check that the diode light in both power supply and control box are lightning
o
If not then check that plugs for both AC cord and handset are correct fitted
o
If the diode light still not are lightning then contact your dealer for additional support
o
If the diode lightning is on, but where the diode light in the control box is flashing then
o
disconnect the 220V for 1 minute and connect again
If the diode lightning in the control box still are flashing then contact our dealer for additional
O
support
11.
DECLARATION OF CONFORMITY
We hereby declare, under our sole responsibility that the following products:
-
ConSet changing table type BSR is in accordance with:
Directive 2006/42/EF of The European Parliament and of the Council of 17 May 2006 on machinery
-
and on changes of directive 95/16/EF
With reference to the above please be aware that:
-
the changing table is considered a machine and
-
the changing table may not be used until it has been assembled and installed according to the
instructions.
Manufacturer:
ConSet A/S
Industrivej 23
DK-6900 Skjern
Danmark
Tel: +45 9680 0080, Fax: +45 9680 0081
www.conset.com
13