CASO DESIGN 11312 Manuel d'instruction - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CASO DESIGN 11312. CASO DESIGN 11312 18 pages.

7.3 Descaling

Descale the device regularly, at least after every 25th use.

Place the device into the cooking vessel and clamp it so that the device is cover with a mixture

of 2/3 water and 1/3 vinegar just shortly under max marking.

Set temperature to 180 °F and heat up the mixture for at least 1 hour. In the meantime refill

water. After this thoroughly clean all parts under running water that were in contact with the

water and dry them.

The following table may help you narrow down and address minor malfunctions:

Danger

► Only qualified electricians, who have been trained by the manufacturer may carry out any

repairs on electrical equipment.

► Improperly performed repairs may result in personal injury or damage to the device.

The device does not work:

1. Check that the cable is properly plugged into the wall socket

2. Check cable for damage.

3. Verify that the wall socket works with another device.

The digital display is lit, but the device does not start the cooking program and displays an

error code instead:

Error

Possible Causes

Code

EE1

1. Cooking vessel is empty

2. Water too low

3. Device is not positioned

correctly on the table

4. Error in electronics

Solution

Fill clean water up to above the "MIN" level.

Place the device on a flat surface

Please contact customer service