DANOPLUS DP-101 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DANOPLUS DP-101. DANOPLUS DP-101 2 pages. Sound level meter with bluetooth communication

Imprimer la page

• Data recording & exporting

1. Data recording through APP on the phone (the data will be stored on the

app and can store up to 100,000 groups).

a. Click "Setting" in the "Menu", then set the mode of reading, recording

intervals, and alarm value to your liking and save the settings.

IOS version

b. Click "Record on Phone" on IOS version and "Start" on Android version

to start the recording. Real-time data and data graph will appear.

Measured value

Data graph

Click to start

IOS version

c. Click "Stop" to stop the recording

and then click "Save" in the "Menu" to

save the data. You will now be asked

to name and save the file.

d. To clear the data recorded on the

app, click "Clear" in the "Menu".

Note: Please must save the data first after finishing the recording. The

data recorded on the app will be cleared up when you close the app.

2. Click the "Share" icon, and can share on the

available apps.

Save or share the file through the

application on the Share Sheet.

FOR ANDROID VERSION ONLY

• To view the data

1. Click the "data file" on the top right corner of the interface.

2. Click the "file name" to check the data.

Data file

3. Can be viewed as

Curve data or List data.

Click the dropdown button

to choose between Curve

and List data view.

• To export the data

1. While on the "record file", click the dropdown button and select "Export".

2. Choose to export via PDF or Excel file.

3. Click "Confirm" to download the file. The downloaded file will be stored

in the "dB_Tester" folder located in the /storage/emulated/0/

Android version

measuring

Android version

IOS version

Android version

- 4 -

Curve Data

List Data

downloaded files location

- 6 -

2. Data recording on Meter (the data will be stored in the meter and can

store up to 20,000 groups).

a. Click "Setting" in the "Menu", then set the recording intervals and the

total number of records you wish to set for your meter

IOS version

Note: The meter will automatically stops recording when the saved data

reaches the total number of records you set.

b. To start the data recording, click "Start" on the app or press and hold

the "

" key on the meter until the dBA symbol starts flashing.

c. To stop the data recording, click "Stop" on the app or press and hold

the "

" key on the meter until the dBA symbol stops flashing.

d. Click "Export" on the app to export the stored data in the meter to the

app. Set the name and then save the file.

e. To clear the data recorded in the meter, click "Clear" on the app.

IOS version

VIEWING & SHARING SAVED DATA

FOR IOS VERSION ONLY

• To View the data

1. Click the "data file" on the top right corner of the interface.

2. Click the "File name" to check the data.

Data file

• To share the data

1. While on the Data file page, swipe

the file to the left. Share and Delete

icon will be shown.

CALIBRATION METHOD

To calibrate the meter, an external sound level calibrator that can provide a

94.0dB signal at 1kHz and a small flat screw-driver are required. Follow the steps

below to calibrate the instrument.

1. Turn on the meter and carefully plug the microphone head in

1/2 inch hole of calibrator

2. Turn on the calibrator and set the calibrator to output 94dB@1KHz.

3. Use flat screwdriver to adjust the calibration potentiometer

located at the back, and make the LCD display 94.0.

4. Turn off the calibrator and remove the microphone very carefully.

The meter has been calibrated properly in the factory, the recommended

calibration interval is 1 year.

BATTERY REPLACEMENT

The meter is powered by 3 pcs of AAA 1.5V Batteries.

Replace the batteries when:

• The low battery signal icon

• The meter cannot be powered on.

To install the batteries:

1. Turn off the meter and remove the battery cover.

2. Replace the old batteries with 3 new AAA 1.5V batteries.

3. Put back the battery cover.

TECHNICAL PARAMETERS

Measuring Range

Accuracy

Frequency Response

Frequency Weighting

Resolution

Working Temperature and Humidity

Storage Temperature and Humidity

Power Source

Weight

External Dimension

Data Storage

Auto power off

MAINTENANCE

1. If the device will not be used for a long period of time, remove the

battery to prevent damage to the device due to battery leakage.

2. To prevent damage or severe deterioration to the device, do not open

the inside of the device or modify its circuitry.

3. Do not place the device in a humid, dusty, acidic, alkaline or corrosive

environment to avoid damage to the device.

4. Use a clean, soft cloth to wipe the meter if it becomes dirty.

Android version

Swipe to the left

- 5 -

Install three 1.5V AAA batteries

will appear on LCD.

30 ~ 130dBA

±1.5dB

31.5Hz ~ 8KHz

A Weighting

0.1dB

0 ~ 40°C, 10 ~ 80%RH

-10 ~ 60°C, 0 ~ 90%RH

3*1.5V AAA Batteries

96.38g (Excluding Battery)

56.1 x 177 x 36.03 mm

20000 groups

10 minutes without operation

- 7-