Audiophony PA GO-MONO Manuel de l'utilisateur - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Audiophony PA GO-MONO. Audiophony PA GO-MONO 16 pages.

GO series microphones - Lavalier, headband or handheld UHF systems

3.6 - Configuring channels

Use the faders located on your transmitter and receiver to select the carrier frequency of your

UHF system.

Your transmitter and receiver must be set on the same channel.

In order to use several mic simultaneously, choose frequencies as far apart as possible.

For instance:

For mic no. 1 on channel 1 (863.125 MHz)

For mic no. 2 on channel 3 (863.625 MHz)

For mic no. 3 on channel 4 (864 MHz)

For mic no. 4 on channel 6 (864.500 MHz)

This frequency range allows the use of 4 microphone simultaneously, at full volume, in the best

environment possible.

However, the signal reception depends on surrounding disturbances that might impact on the

performances.

3.7 - Available frequencies

Frequency 1 : 863.125 MHz

Frequency 2 : 863.375 MHz

Frequency 3 : 863.625 MHz

Frequency 4 : 864 MHz

Frequency 5 : 864.250 MHz

Frequency 6 : 864.500 MHz

Frequency 7 : 864.750 MHz

Frequency 8 : 864.875 MHz

Frequency 9 : 863.250 MHz

Frequency 10 : 863.500 MHz

Frequency 11 : 863.750 MHz

Frequency 12 : 863.875 MHz

Frequency 13 : 864.125 MHz

Frequency 14 : 864.375 MHz

Frequency 15 : 864.625 MHz

Frequency 16 : 865 MHz

English

Page 11