Audiopipe APK-3500 Manuel du propriétaire - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Audiopipe APK-3500. Audiopipe APK-3500 12 pages. Sound quality amplifier
Imprimer la page
HIGH PASS FILTER ( 20~5KHz @12dB )
Controls the high pass filter frequency
for the speaker output.
The Low pass filter is always on with
12dB per octave slope.
X-OVER ( HPF-FULL-LP/BP )
It selects the crossover as High pass,
Full and Low pass & Band pass filter.
The selected crossover has effect.
LOW PASS FILTER ( 50~500HZ @12dB )
Controls the low pass filter frequency
for the speaker output.
The Low pass filter is always on with
12dB per octave slope.
4-3. FULL RANGE 4CHANNEL
RCA INPUT
GAIN ( 6V ~ 0.2V )
Used to reach maximum amplifier
power by matching the output
voltage of with a wide variety of
the headunits
RCA INPUT :
Connect preamp signal
cables from the source
or the headunit to RCA
input
BASS BOOST ( 0 ~ 18dB )
The bass boost boosts frequency
centered at 45Hz.
REMOTE PORT
This port is for remote level control.
Plug remote control's connector for
remote level control's use.
Remote controls level from
the driver's seat.
POWER & PROTECT LED
Power LED :
Green-lit shows correct operation.
Protect LED :
Red-lit shows general malfunction,
faulty connection, thermal overload,
speaker short protection.
HIGH PASS FILTER ( 20~5KHz @12dB )
Controls the high pass filter frequency
for the speaker output.
The Low pass filter is always on with
12dB per octave slope.
X-OVER ( HPF-FULL-LP/BP )
It selects the crossover as High pass,
Full and Low pass & Band pass filter.
The selected crossover has effect.