Consonance Linear 845 Manuel - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Consonance Linear 845. Consonance Linear 845 11 pages.

frequency radiation and both the choice and exact placement of equipment

may be critical. If there is a known problem in your locality it is advisable to

arrange for a home demonstration before purchase to ensure that your

selected Consonance equipment can be operated normally. Susceptibility to

radio frequency interference is related to the wide internal bandwidth

necessary for high sound quality. Systems incorporating moving coil phono

preamplifiers and active crossovers are more likely to suffer.

Troubleshooting Guide

From time to time you may experience problems in obtaining optimum

equipment performance. Following is list of frequently encountered problems.

Problem

Power indicator and

filaments do not light

Sound out of one

speaker only

Static, noise, or hum

Equipment problem could also be caused by fault in any part of the system or

its installation. As Legal consumer protection varies from country to country,

you should always first consult the local dealer for any technical problems that

you may experience. Please contact your local distributor or Opera Audio at

the address in the back of this manual for any difficulties that cannot be

resolved.

Certain Consonance equipment is made in special versions for different

territories as a result it is impracticable to arrange international guarantees.

Please establish appropriate guarantee arrangements with your own dealer at

the time of sale. We are always available to offer help and advice. It is

essential that repairs and updates are only carried out by authorized

Consonance dealer or Opera Audio factory. As many Consonance

Check the fuse and make sure the amplifier is

plugged into a working power outlet

Turn volume control fully counter-clockwise and

reverse input connectors. If sound changes

from one speaker to the other, check source or

replace inter-connect wires. If the sound is still

coming out of the same speaker only, check

speakers on another piece of equipment for

proper operation.

Turn the potentiometers Individually clockwise

or counter-clockwise until the hum reduces to

the lowest level on each channel

Solution