Dante DLF1102 Manuel d'installation et d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Dante DLF1102. Dante DLF1102 10 pages. 1/4" 23x optical, 10x digital zoom 540tvl integrated camera
Imprimer la page
Operating Your Camera
Operating Your Camera
PRIVACY: Mask privacy area using this feature. The mask area
expand/ contract upon the zoom position.
SPECIAL SETUP
USER PRESET
PRIVACY
DAY/NIGHT
DIS
SYNC
COMM
GROUP SEL
: Choose up to eight groups. Each group can consist
of four mask areas.
MASK COLOR:Adjust desired mask colir level.
AREA SEL
: configure eight mask area.
AREA MODE
:
mask
area display.
TOP
: to move the mask area up.
BOTTOM
: to move the mask area down.
LEFT
: to move the mask area left.
RIGHT
: to move the mask area right.
GROUP SEL
AREA SEL
AREA MODE
Color
TOP
BOTTOM
LEFT
RIGHT
EXIT
DAY/NIGHT: select from COLOR. B/W or AUTO mode.
SPECIAL SETUP
USER PRESET
PRIVACY
Day/Night
DIS
SYNC
COMM Addition
IMAGE Addition
EXIT
Specifications
Specifications
CAM ID
: Assign an ID number to the camera ( 1-255).
DISP CAM ID : Displays camera ID on top left comer of the screen.
BAUD RATE
: Configure baud rate from 2400/4800/9600/19200
/38400/57600 bps.
UART MODE : Configure parity bit to NON, EVEN, or ODD. DATA bit
is set to 8 bit, and stop bit 1 bit. Set the UART MOD E to EVEN if
using the remote controller.
RET PKT
: Used to transfer a packet.
EXIT.
IMAGE ADJ: Includes image quality or special function factor
FREEZE
H-REV
V-REV
SHARPNESS
COLOR
END
PREEZE: use this feature to freeze capture an image.
H-REV: Use this feature to horizontally inverse the screen.
V-REV: Use the feature to vertically inverse the screen.
SHARPNESS: Increase this value sharpens object edges. Too high
of a setting. however, produces noise and may obscure the image.
COLOR: Adjusting this value affects the chroma level only; the
burst level is unaffected.
EXIT
EXIT: evert back to the USER PRESET menu.
RESET
To reset your camera to factory default condition.
EXIT
To finish setup menu.
OFF
OFF
AUTO
OFF
INT
SKT PRIVACY
GROUP 1
AREA 1
ON
5
45
110
45
95
OFF
OFF
AUTO
OFF
INT
24
IMABZE SETUP
ON
OFF
OFF
ON
50
26
Operating Your Camera
Operating Your Camera
COLOR : color mode.
B/W
:
B/W
mode.
AUTO
: the camera automatically detects lighting conditions
and selects the mode accordingly.
DIS
: the DIS mode can compensate for vibration of the camera .
USER PRESET
PRIVACY
Day/Night
DIS
SYNC
COMM Addition
IMAGE Addition
EXIT
Note:
This feature have digital zoom function, so maybe reduce
the horizontal resolution .
COMM ADJ: use this feature to select communication protocol.
Position the indicator over 'COMMUNICATON' using the UP or
DOWN button.
COMMUNICATION SETUP
CAM ID
DISP CAM ID
BAUD RATE
UART MODE
RET PKT
EXIT
Specifications
Specifications
Model
Input voltage
Input current
DC12V/300mA (steady-state), 500mA( Max)
Power
Power
Consumption
Size
CCD
Total pixels
Effective pixels
23X,f=3.84mm to
Optics
88.4mm (F1.6 to 3.2)
Min.focus distance
D.ZOOM
OPTICS
V: 52.2 ( near focus) to 2.36 (far focus)
Angle field of view
V: 40.3 ( near focus) to 2.36 (far focus)
scanning system
Sync
SYNC
Frequency
Camera id
Resolution
video output
S/N ratio
Color:0.7lux/f1.6 (50 ire)
B/W: 0.1Lux/F1.6 (50 IRE)
Mini.illumination
Sens-up:0.0005Lux/F1.6 (50 IRE)
Backlight
compensation
FUNCTION
Day/Night
Gain control
white balance
Electronic
shutter speed
Sens-up
O.S.D
Motion detection
SPECIAL SETUP
OFF
OFF
AUTO
OFF
INT
1
ON
2400
8-E-1
DISABLE
25
DLF1102
+ _
DC12V 10%
DC12V/4W (Normal), 6w(Max)
1/4 Inch, Color Super HAD CCD
795(H)*596 (V)
752(H)*582(V)
30X,f=3.3mm to
99mm (F1.6 to 3.2)
1200mm
1000mm
10X
H: 58 ( near focus) to 2.22 (far focus)
V: 44.8 ( near focus) to 1.68 (far focus)
2:1 interlace
Internal
Horizontal: 15.625 KHz, Vertical :50.00 Hz
255 ID selectable
Color:540tvl. B/W: 570TVL
CVBS:1.0Vp-p
50dB (AGC off. Weight ON)
Color:0.4lux/f1.6 (50 ire)
B/W: 0.1Lux/F1.6 (50 IRE)
Sens-up:0.0006Lux/F1.6 (50 IRE)
LOW/MIDDLE/HIGH /OFF selectable
Color/ b/w (icr type)
LOW/MIDDLE/HIGH /OFF selectable
ATW/ auto white balance/Manual
Auto/ Manual (x128-1/50s -1/12000 s)
X128
Built-in
ON/OFF (built-in alarm output signal)
27