Aeware in.k455 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aeware in.k455. Aeware in.k455 13 pages. Audio wired remote control with display
Imprimer la page
installation
Installation in.k455 with adhesive
The keypad should be installed directly onto the spa (or very
close to it) so that it is easily accessible to the user.
• Using the drilling template supplied with the unit, determine the
mounting location and then stick the template on the location.
• Drill two
" (9 mm) diameter holes at 6
3/8
center to center, in the exact position according to the drilling
template.
• Cut out and remove the material between the two holes
following the profile with a jig saw (see illustration).
• Clean the installation surface and peel the adhesive gasket from
the back of the keypad.
• Insert keypad and align it correctly, then secure it properly in
place by using the two wing nuts provided.
6
Drill 2x
2x
" (158 mm) from
7/32
6
"
7/32
158 mm
"
3/8
9 mm
Follow profile with jig saw
in.k455
2
"
5/16
59 mm
Gasket with adhesive
"
∅
3/8