BelFone BF-TR8500 Manuel - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} BelFone BF-TR8500. BelFone BF-TR8500 20 pages. Professional dmr repeater

Analog Mode Function

If the channel operates in the analog repeater mode, and the current channel

currently has any voice service under repeating, indicator A will flash green,

indicator B will flash red.

This repeater supports digital and analog channel auto switching, it can smartly

select the right one based on the type of received signal and then transmitting.

The repeater supports the back-to-back function to realize back-to-back

connection between a single repeater and other device for repeating voice. The

current device supports back-to-back connection of digital channels and that of

analog channels. The back-to-back function can be set via the programming

software or the preprogrammed [Back to back Switch] key.

Note: Back-to-back connection of analog channels requires the GPIO BUSY line set via

the programming software to output an active level and the PTT line to input an active

level. The "active level output by the BUSY line" of the current device shall be the same

with the "active level input by the PTT line" of the other back-to-back device.

The repeater supports Simulcast function. When the Simulcast function is

enabled, the repeater can be registered as an peer with the base station

controller of BelFone intelligent interconnection system to realize networking of

Simulcast function.

Note: Simulcast function is optional.

Positioning Service

The repeater supports satellite positioning, and can have the positioning type set

via a programming software to: GPS/BD/GPS+BD. The position switch can be set

via the programming software or the preprogrammed [Satellite Positioning Switch]

key. When GPS is enabled, the LCD will show icon:

disabled, the LCD will show icon:

, When GPS is