Belfort ULTIMATE PB111 Informations et instructions d'utilisation

Parcourez en ligne ou téléchargez le pdf Informations et instructions d'utilisation pour {nom_de_la_catégorie} Belfort ULTIMATE PB111. Belfort ULTIMATE PB111 8 pages. 120v

Imprimer la page
THE ULTIMATE
DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THE INSTRUCTIONS
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Never use the Booster Heat when solvent is in the machine.
2. Never attempt to heat solvent above 130 °F.
3. Always use a nonfl ammable solvent with a fl ash point of 140 °F or higher.
DO NOT SMOKE WHEN USING HYDROCARBON-BASED SOLVENTS
Even solvents with a fl ash point above 140 °F can be ignited, especially as an aerosol
from the wand.
4. The recovery bucket should be emptied each time the holding tank is fi lled.
5. Always make sure the fl oat travels freely up and down the rod after emptying the recovery bucket.
6. Always vacuum out the stainless steel tank and solution lines when switching from a solvent to a
water based detergent, and vice versa (see Operating Instructions).
7. Always use a drop cloth under the machine during operation.
8. Vacuum any unused solution out of the solution tank and empty the recovery bucket after each job.
9. Keep machine from rain and snow, extremes in temperatures, and store in a heated location.
Use the machine indoors. Do not use outdoors.
10. Do not run the pump dry.
11. Never operate a machine that is leaking or in need of a repair.
12. Always use a defoamer. The vacuum shut-off will not activate properly if foam is in the recovery
bucket. Water damage to the vacuum motor or other components will void the warranty.
If you have any questions before you operate the machine, call your supplier for instruction
EXTRACTOR
120V
: PB111
®
INFORMATION
&
OPERATING
INSTRUCTIONS
.
12-2010