Constellation audio Inspiration PREAMP 1.0 Manuel de l'utilisateur - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Constellation audio Inspiration PREAMP 1.0. Constellation audio Inspiration PREAMP 1.0 16 pages.
Également pour Constellation audio Inspiration PREAMP 1.0 : Manuel de l'utilisateur (16 pages)

Imprimer la page

2. Check that the cables to the amp are on the correct channels of the preamp. The XLR and RCA

outputs on the back of the PREAMP 1.0, from left to right, are 1, 2, 2, 1.

Remote control does not work

1. Move the remote a few feet away to a different location and try again. The remote requires a clear

line-of-sight to the infrared detector on the PREAMP 1.0's front panel.

2. If the remote still doesn't work, use a 3/32" Allen wrench to remove the remote's battery

compartment cover, then replace the remote's two AAA batteries and replace the cover.

Balance and volume controls do not function

1. If you are using the input configured for home theater bypass, this situation is normal—volume and

balance controls do not function in this mode.

2. If you are not using an input configured for home theater bypass, you need to clear out the minimum

and maximum volume settings for the input you are using. Press the multifunction button labeled Setup

on the screen, then press the Default button.

For more information

Your PREAMP 1.0lifier should give you many years of trouble-free, maintenance-free service. If you

encounter any problems you cannot solve or have technical questions, please contact your

Constellation Audio dealer.

For more information about Constellation Audio products, please visit our website: