Construct A Truck USA Rascal Instructions de montage - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} Construct A Truck USA Rascal. Construct A Truck USA Rascal 4 pages.

Imprimer la page

ASSEMBLY INSTRUCTIONS FOR

The RASCAL Kit

8. Glue and assemble the Double

Sunroof, the Tailgate Name-

Plate, the Rear Floor Deck

with Seat Back.

9. Then glue and assemble the other Body Side Panel to complete the Body As-

sembly.

10. Slide the Middle Floor Deck through the slots in the Body Side Panels without

any glue

11. Apply glue to the Body Side Reinforcement Rail. Also apply glue to the under-

wooden hole.)

13. Glue and install the Reinforcement Rail on the other side, using the other two

Wheel Assemblies and screws to clamp the part securely. Set the model aside to

dry.

side of the Middle Floor Deck.

12. Then attach the front and rear Wheel Assembly

(two wheels with tread

pattern on either side of

one plain wheel). Use

the #6 x 1" long screw

with a flat washer and

tighten the screw so that

it clamps the Reinforce-

ment Rail tightly against

the Body Side Panel.

(Be careful not to over-

tighten; it can strip the