AudioSnax Sport Pro Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} AudioSnax Sport Pro. AudioSnax Sport Pro 10 pages. 4k ultra hd

Imprimer la page
Video
To start recording:
Press the Video Button. The camera light will flash while recording.
To start time lapse video:
To start a time lapse video,verify the camera is in time lapse video mode.
Press the Video Button. The camera light will flash while recording.
To start slow motion video:
To start a slow motion video,verify the camera is in slow motion mode.
Press the Video Button. The camera light will flash while recording.
To stop recording:
Press the Video Button again. The camera will stop flashing to indicate recording has stopped
P
hoto
To take a photo:
To press the Photo Button. The camera will emit a shutter sound.
To take Burst Photo
To capture a Burst Photo series,verify the camera is in Burst Photo mode.
To press the Photo Button. the camera will emit shutter sound each time a photo is taken.
To take time lapse photo:
To capture a time lapse Photo,verify the camera is in time lapse mode.
To press the Photo Button. The camera initiates countdown and emit shutter sound
To take continuous Lapse photo
To capture a continuous Lapse photo,verify camera is in continuous Lapse mode .
To press the Photo Button. The camera initiates countdown and emit shutter sound, press again the Photo Button the
camera will stop taking continuous photo.
Tips:
* The remote controller is only compatible with our camera, the third-party remote controller may not be support.
* The remote controller is splash-proof, please do not use it underwater.
* Be sure to remove the remote control battery and put it in a safe and reliable place , if do not use for a long time.
* The remote control will always be in standby state. If the indicator is not on, the battery may be out of power. In order
to confirm the normal use of the remote control, please replace the remote control battery regularly and in time as
following steps:
1. Remove the four screws and the cover;
2. Remove the battery and insert a new CR2032 battery flat side up.