DanVex DEH-1900i Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DanVex DEH-1900i. DanVex DEH-1900i 18 pages.

Control panel and LCD-display

Dehumidifier control elements are located on the dehumidifier body on the left side upper

panel.

LCD display

Button Function

1. "Power" / "ON/OFF button

Press this button to start the machine, it enters start-up mode after the buzzer buzzes

twice Press this button to stop the machine, it enters stop mode after the buzzer

buzzes once

2.1 "Timer" button(for 2G controller)

A, In standby mode, press "timer" to set Auto starting time, "on time"will flash in

screen, and click "+" or "-" to adjust the time; B, In working mode, press "timer" to

set Auto stop time, "off time"will flash in screen, and click "+" or "-" to adjust the time;

3. "+" button

Press this button directly to increase the set humidity. Buzzer buzzes once for each

pressing and the set humidity decreases by 1% RH. Successive operation can be

achieved by pressing this button successively. Press "Time" button before pressing

this button, the time (hour) can be increased.

4. "－" button

Press this button directly to decrease the set humidity. Buzzer buzzes once for each

pressing and the set humidity decreases by 1%RH. Successively operation can be

achieved by pressing this button successively. Press "Time" button before pressing

this button, the time (minute) can be decreases.

We do not ensure the efficient operation of the unit if the room temperature is

below 10 °C and if the relative humidity is below 40 %.

www.danvex.fi

Button ON/OFF

Button HUMIDITY UP

Button TIMER

Button HUMIDITY DOWN