Cast S226S Manuel de l'utilisateur - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Cast S226S. Cast S226S 16 pages.

1. Open doors and windows to ventilate room.

2. Let the fire out, or eject and safely dispose of fuel from the stove.

3. Check for flue chimney blockage and clean if required.

4. Do not attempt to re-light the fire until the cause has been identified and

corrected.

If necessary, seek professional advise.

6. Operating Instructions

The controls

The amount of heat emitted by the stove is

regulated using the air control build under the

stove.

Opening the primary air control vent can be

used to revitalize the fire effectively, producing

significantly more vigorous combustion.

The "glass wash" feature when used, should

function to effectively keep the inside of the

door glass clear of smokey deposits.

WARNING:

The temperature reached by these items during operation may cause an

injury to an end-user. As these are intended to be adjusted during

operation, it is recommended that protective gloves are wore when handing

these parts.

Fuel

This stove will function with wood fuel, but in general all fuel should be dry and timber

should be well seasoned so as to have a moisture content below 20%. The use of

damp wood will result in more soot and tar deposits being left in the chimey, flue and

stove, and will not release heat if thermal energy is being used to drive out moisture

from the fuel.

DO NOT BURN wet or unseasoned wood, construction timber, painted or treated

wood, driftwood or manufactured board products. Doing so will result in the wood