Danville Signal Processing dspblok 21469 Manuel de l'utilisateur - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Danville Signal Processing dspblok 21469. Danville Signal Processing dspblok 21469 20 pages.
Imprimer la pageMechanical Dimensions (dspblok 21469)
60.00[2.36]
57.00 [2.25]
44.00 [1.73]
Holes 2.3 [0.090] (4 places)
55.00[2.17]
Mounting holes are equidistant from the center of the dspblok. These holes are 2.3mm in diameter, suitable
for 2-56 or M2 screws. When 4.3mm height mating female connectors are used, the board will be 6.3mm
(0.25 in) above the target board, therefore 0.250 standoffs may be used.
Component height above the board is 6mm (0.236 in). The board is 1.6mm (0.062 in) thick.
dspblok™ 21469 User Manual
46.00 [1.81]
28.00 [1.10]
U6
U4
U7
U10
U3
U2
U1
Y1
JH1
26.00 [1.02]
52.00 [2.05]
57.00 [2.24]
60.00 [2.36]
JH4
JH8
JH7
55.00 [2.17]
Top Side
24.00 [0.94]
Bottom Side
Page 14