Audiotec Fischer Match PP 86DSP Manuel - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Audiotec Fischer Match PP 86DSP. Audiotec Fischer Match PP 86DSP 15 pages. 8-chanell amplifier with integrated 9-chanell dsp
Imprimer la page
Connectors and control units
Speaker Output E - H
1
Connector for the loudspeakers of the chan-
nels E to H. Alternatively you can directly
connect a passive MATCH PP subwoofer.
Optical Input
2
Optical input for digital stereo signals (SPDIF
format).
Mono Line Output
3
Mono line outputs for connecting external
is used to turn on these devices.
Clipping LED
4
This LED lights up red if one of the analog
8
Fuse
8
This LED will light up if the fuses inside the
+12 V
9
Connector for the +12 V power cable to the
positive terminal of the battery.
REM
10
Connector for the remote cable.
GND
11
Connector for the ground cable (negative
terminal of the battery or metal body of the
vehicle).
Auto Remote
12
This switch allows to activate / deactivate
16
1
2
9
10
11
3
4
6
5
inputs is overdriven.
Input Sensitivity
5
Control for adjusting the input sensitivity.
Highlevel Input E + F
6
Highlevel speaker input of the channels E
and F.
System Connector
7
Connector for the MATCH cable harness.
Make sure that you only use the original ca-
the PP 86DSP with your car radio.
12
13
14
15
Remote Out
13
The remote output has to be used to turn on /
the Mono Line Outputs.
Control Input
14
Multifunction interface for e.g. an optional
remote control or other MATCH PP 86DSP
accessory.
USB Input
15
Connects the PP 86DSP to your PC.
Status LED
16
This LED indicates the operating mode of the
sen.
Control pushbutton
17
Use this button to either switch between the
setups or initiate a reset of the device.
7
16
17
-