Audiotec Fischer DIRECTOR Manuel - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Audiotec Fischer DIRECTOR. Audiotec Fischer DIRECTOR 4 pages.

Imprimer la page
Audiotec Fischer DIRECTOR Manuel
DIRECTOR
1. Connect the rectangular 8-pole connector
of the lead cable (included in delivery) to the
DIRECTOR.
USB input Insert lead cable here
2. Insert the circular plug of the lead cable into the
multi-functional input (Control Input) of the DSP.
3. At first, connect the ground wire of the lead
cable (Ground / brown) to a ground point (e.g.
metal body of the vehicle - an area which has
been cleaned of all paint residues - or ground
connector of a DSP / amplifier). The next step
is to connect the power cable of the lead cable
(+12 V / orange) to a +12 V voltage source (e.g.
positive terminal of the battery or the +12 V con-
nector of a DSP / amplifier).
Attention: Check the polarity during the in-
stallation in order to prevent damages of the
DIRECTOR and / or DSP / amplifier / battery or
other equipment.
Optionally the illumination wire (Light / blue)
can be connected to an illumination wire of the
car (e.g. dashboard illumination). If the illumina-
tion wire is connected it is possible to use the
automatic dimming function of the DIRECTOR.
Example: Connecting the power supply to
a HELIX DSP is described in the following
section. Connect the ground wire (Ground /
brown) of the lead cable to the ground termi-
nal of the DSP (see figure below / black arrow).
Next, connect the positive wire (+12 V / orange)
to the +12 V terminal of the DSP (see figure be-
low / red arrow).
4
4. Now you can turn on your sound system and
make your adjustments.
Important: The USB input of the DSP is deacti-
vated as soon as the DIRECTOR is connected
and turned on. If you want to establish a con-
nector between your PC and the DSP please
always use the USB input of the DIRECTOR.
Important: In order that the DIRECTOR is per-
manently recognized by the connected DSP it
must be activated in the "Device Configuration
Menu".
Warranty disclaimer
The limited warranty comply with legal regulations.
Failures or damages caused by overload or im-
proper use are not covered by the warranty. Please
return the defective product only with a valid proof
of purchase and a detailed malfunction description.
Technical specifications are subject to change!
Errors are reserved!
For damages on the vehicle and the device, caused
by handling errors of the module, we can't assume
liability. These devices are certified for the use in
vehicles within the European Community (EC).
Audiotec Fischer GmbH
Hünegräben 26 · D-57392 Schmallenberg
Tel.: +49 2972 9788 0 · Fax: +49 2972 9788 88
Internet: www.audiotec-fischer.com
+12 V
GROUND