Contacta STS-K071 Manuel d'installation et d'utilisation - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} Contacta STS-K071. Contacta STS-K071 16 pages. Window intercom system - speaker and microphone pod
Également pour Contacta STS-K071 : Manuel d'installation et d'utilisation (20 pages)
Imprimer la page
Microphone & Speaker Installation
1. Place the staff pod on the staff side of the counter top, ensuring it does
not cause an obstruction and is as close to staff as possible.
2. Place the speaker pod on the customer side of the counter top, ensuring it
does not cause an obstruction.
3. Place a mouse microphone on the customer/
visitor side of the counter top, ensuring it
does not cause an obstruction and is as close
to customers/visitors as possible.
For best performance all mouse microphones
should be fitted facing the user as shown in
the image on the right. The recommended minimum distance between
the mouse microphone and speaker pod is 300mm.
4. Speaker pods and staff pods can be either free standing or fixed. Move to
step 10 if you do not wish to fix the pods to the counter.
5. Use cable management holes in the counter to run the staff pod, speaker
pod, and mouse microphone cables to the amplifier. If there are not
already cable management holes, drill suitable locations near the rear of
both the staff and customer sides of the counter.
6. Remove the top of the pods to gain access to the fixing points.
7. Mark the two fixing points on the bottom of both pods. Then mark two
Staff Counter Side
Mouse Microphone
Speaker Pod
Mouse microphone direction
Staff Pod
Customer / Visitor
Counter Side
7