DAPAudio EDCS-8210 Manuel - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio EDCS-8210. DAPAudio EDCS-8210 12 pages.
Imprimer la page
EDCS-8210 8"
Speaker Wiring
To achieve maximum performance from the speaker, it is recommended to use good quality CL2 or CL3
rated speaker cable. For distances greater than 20 m, use a 2,5 mm² cable. For shorter distances,
a 1,5 mm² or 0,75 mm² cable is sufficient.
Make sure the cable meets any local or national regulations.
Use the following cables:
D9201
– SPK-275 stage speaker cable 2 x 0,75 mm² 100 m spool
D9201B
– SPK-275 stage speaker cable 2 x 0,75 mm² 100 m spool, black
D9202
– SPK-215 stage speaker cable 2 x 1,5 mm² 100 m spool
D9202B
– SPK-215 stage speaker cable 2 x 1,5 mm² 100 m spool, black
D9203
– SPC-225 stage speaker cable 2 x 2,5 mm² 100 m spool
D9203B
– SPC-225 stage speaker cable 2 x 2,5 mm² 100 m spool, black
D9204
– SPK-225 stage speaker cable 2 x 2,5 mm² 100 m spool
D9204B
– SPK-225 stage speaker cable 2 x 2,5 mm² 100 m spool, black
The table below provides an overview for maximum speaker cable lengths for a given conductor size.
30 Watt
60 Watt
120 Watt
240 Watt
Depending on the desired output, you can choose which wires of the speaker to connect to the speaker
cable.
For 100 V speaker systems:
●
red = 10 W, white = 5 W, black = common
Note: Make sure the speaker connection polarity is correct. Always connect positive to positive and
negative to negative. In order to provide the best possible sound, all speakers in a system need to be
wired with the same polarity. If the connections to one speaker in a system are reversed, this will result in
loss of the low frequencies and will affect the overall performance of the system.
Order code: D6594B/D6594W
0,75 mm²
800 m
400 m
200 m
100 m
1,5 mm²
1600 m
800 m
400 m
200 m
7
2,5 mm²
2666 m
1333 m
666 m
333 m