DAPAudio WCSS-230 Manuel - Page 16

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio WCSS-230. DAPAudio WCSS-230 20 pages. Wifi speaker v1

Imprimer la page

WCSS-230 WiFi Speaker

Troubleshooting

No Sound

Always check if all the cables and cords are connected. Always turn off power to the area before

checking the wires, to prevent electric shock. Reset the speakers and check your software.

01) If your Wi-Fi connection is not of good quality, try connecting the Wi-Fi speaker to your router by

means of a CAT-5 cable.

02) If everything works properly and there is still no sound, revisit the manufacturer's instructions to make

sure they were followed during installation.

03) If everything was installed correctly and there is still no sound, you may want to consider bringing in a

professional to take a look at your speakers.

Sound Warping

If the sound coming out of your ceiling speakers is loud enough, but seems to be warped or distorted,

your treble or bass levels may need to be adjusted.

If there are not many pieces of furniture in the room and the floor has no carpet or rug, then you will most

likely have to set your treble to minus. With very little in the room to absorb the sound, too much treble

can make the sound bounce off of fixtures in the room, making it tinny sounding.

With the bass, if the speakers are too close to a wall and are not aimed properly, then you will need to

set the bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.

Product Specification

Wi-Fi

 Built-in Wi-Fi

 Wireless network compatibility 802.11b/g/n

 Support for online audio streaming media

 Supported audio formats: MP3, WMA, AAC, ACC, ACC+, ALAC, APE, WAV

Amplifier

 Type: class D

 RMS power: 2 x 50W/8Ω

 Power adapter: 24V DC/2,5A

Speaker

 Frequency response: 65Hz – 20kHz

 RMS power: 60W

 Impedance: 8Ω

 Sensitivity (1w/1m): 90dB

 Woofer: 6,5" Kevlar woven cone

 Tweeter: 0,75" Titanium dome

 Treble attenuation: +3dB/-3dB

 Dimensions (passive speaker): 233 x 233 x 88 mm (LxWxH)

 Dimensions (Wi-Fi speaker): 233 x 233 x 98 mm (LxWxH)

 Weight (passive speaker): 1,6 kg

 Weight (Wi-Fi speaker): 1,8 kg

Design and product specifications are subject to change without prior notice.

Ordercode: D6450

Website:

www.Dap-audio.info

Email:

[email protected]