Audiovalve Prometheus 100 Manuel d'instructions - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Audiovalve Prometheus 100. Audiovalve Prometheus 100 15 pages. High power mono block
Imprimer la pagePrometheus 100
This amplifier Prometheus operates in class - A and is
therefore capable of generating a moderately high temperatue
which requires careful placing to aviod any effect this heat
may have on other equipment, furniture and fittings etc.
Do not remove the top cover from this ampllifier.
Hazardous voltages are present. Any repair work should
be referered to a suitable qualified and experienced
service person.
Do not attempt to connect any input of this amplifier to
any of its outputs.
Do not earth any output terminal or connect any of these
terminals together without following the instructions in
this manual or seeking qualified assistance.
Do not place this amplifier in any position where liquids
or any foreign material may accidentally enter it.
Do not disconnect any in / output wire, while the amplifier is
operating.
Do not connect any voltage source short circut, earth / ground
or appliance (other than suitable HiFi quality loudspeakers )
to any output terminal.
Some preamplifiers, proccesors, CD players etc produce
large switching pulses when switched on, causing a loud
click through the loudspeakers. For this reason, turn on
all other equipment in your system and operate the
Stand - by mode of the amplifier before turning on the Prometheus.
Note: the Prometheus power amplifier do not cause this problem.
power mono blocks
WARNING