DAPAudio D4161 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio D4161. DAPAudio D4161 11 pages.

Installation

Remove all packing materials from the Cesium. Check that all foam and plastic padding is removed.

Screw the equipment into a 19" rack. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 240V power, or vice versa.

Install this device on a flat surface, not bending or curved.

Do not supply power before

all components of the system are

set up and connected properly.

You can connect the Cesium in 2 different modes: Stereo and Parallel

CONNECTING FOR CESIUM 200 and 300 :

Stereo mode:

In this mode, connect the 2 inputs CH1 and CH2 to your mixer's outputs.

Put the selector to the stereo position.

Output volume can be adjusted by means of the two potentiometers.

Connect the 2 turn lock outputs to the 2 speakers.

Parallel mode:

In this mode, connect the input CH1 to your mixer's outputs.

Put the selector on the parallel position.

Outputs volume can be adjusted by means of the two potentiometers.

Connect the 2 turn lock outputs to the 2 speakers.