DAPAudio D4513 Manuel d'utilisation - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} DAPAudio D4513. DAPAudio D4513 16 pages.

CA-2300
Troubleshooting
CA-2300
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. If the unit operates properly, do not carry out following steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) Replace the fuse. See page 9 for more information.
04) If all appears to be O.K., plug the unit in again.
05) If nothing happens after 30 seconds, unplug the device.
06) Return the device to your DAP Audio dealer.
Product Specifications
Output Power
Stereo 2Ohm: 2 x 450W RMS
Stereo 4Ohm: 2 x 300W RMS
Stereo 8Ohm: 2 x 200W RMS
Bridge 2Ohm: Not allowed
Bridge 4Ohm: 1 x 400W RMS
Bridge 8Ohm: 1 x 300W RMS
Frequency response: 20Hz – 20kHz, +0/-1dB
THD: <0.1%
S/N rate: >98dB A-weighted
Crosstalk: >70dB
Damping factor: >180
Gain: 30V
Input sensitivity: 0,9-1,1V (+/-1dBv)
Input impedance: 20kOhm balanced, 10kOhm unbalanced
Output mode: Stereo, Bridge
Amp technology: Class D
Power supply: SMPS
Protection: Clip Limiter (Fixed)
Cooling: Forced-air by radial fan
Air flow: Front to back
Installation depth: 278 mm (excl. conn.)
Input connectors: 3-pin XLR IN, TRS 6,3 mm Jack IN
Output connectors: Speakon OUT, TRS 6,3 mm Jack OUT
Power connector: IEC
Input voltage: 210-240V AC, 50/60Hz
Power consumption: 750W
Fuse: T5AL/250V
Dimensions:
483 x 281 x 44 mm (LxWxH)
19" x 1HE
Weight: 4,2 kg
Design and product specifications are subject to change without prior notice.
Ordercode: D4513
Short Circuit
Overheat
Overload
DC Voltage
Soft Start
Website:
www.Dap-audio.info
Email:
service@highlite.nl
10