DAPAudio D6145 Manuel - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio D6145. DAPAudio D6145 15 pages.

9. Master control

Use to adjust the volume level for each channel to your preference.

10. Mic 1 input

Mic level balanced TRS jack input for channel 1. Accepts balanced and unbalanced inputs.

11. Priority button

Pushing this allows you to switch the PA-306 in priority mode. In priority mode, all channels except

channel 1 are muted as in the (optional) microphone connected to channel 1 is picks up a sound.

12. Siren button

Pushing this button will start the siren.

13. Line 1 input

3,5mm stereo mini jack input for connecting a line level device such as an I-pod, CD player etc.

14. Clip LED

The clip LED indicates peak levels at the output of the amplifier. If the clip LED frequently blinks or lights

continuously, the output is likely to enter clipping. If this happens, we strongly suggest lowering the master

(9) control.

15. Signal LED

Indicates an audio signal is present at the output.

16. Power LED

Indicates, the device is switched on.

17. AC power switch

This is the main Power switch. Press to turn the amplifier on.

Backpanel

Fig. 2

18. AC-selector

Before connecting your PA-306 to the mains, make sure the AC-selector is set to the proper voltage used

in your country. If you're not sure, consult a skilled technician.

19. DC 12V 5A terminal

DC 12V input (battery)

20. Common speaker terminal

Connect this terminal with the – terminal of your low speaker(s).