DAPAudio DM-2000 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DAPAudio DM-2000. DAPAudio DM-2000 16 pages.

DM-1000 / DM-2000

Backside

Fig. 02

Combo XLR/6,4 mm Jack connector IN (balanced/unbalanced)

Connect equipment with balanced or unbalanced line level outputs.

Wiring of the XLR:

Pin 1 = shield/ground

Pin 2 = + positive or "hot"

Pin 3 = - negative or "cold"

Wiring of the Jack:

Tip = + positive or "hot"

Ring = - negative or "cold"

Sleeve = shield/ground

When connecting an unbalanced signal, the wiring should be as follows:

Pin 2/Tip = + positive or "hot"

Pin 1-3/Sleeve = shield/ground

Mode switch

Flick the switch to select your desired operation mode: parallel, bridge or stereo.

3-pin XLR Link connector OUT

Connect the DM to another amplifier.

RCA connector Line IN (unbalanced)

Connect an audio source (AM/FM tuner, CD player, etc).

Cooling fan

CH1/CH2 binding posts/Speakon OUT

Connect your speakers to the red (+) and black (-) binding posts.

Use the Speakon connectors to connect the device to high power speakers, using professional

speaker cables with twist-locking plugs.

IEC 110-240V AC power connector IN

Breaker

Automatic fuse. If overcurrent occurs, the fuse will break the circuit.

Ordercode: D4212 / D4213