DAPAudio Compact 6.2 D2320 Manuel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} DAPAudio Compact 6.2 D2320. DAPAudio Compact 6.2 D2320 16 pages.

Compact 6.2

Threshold control

Turn the control to set the threshold of compression.

Ratio/Compressor control

Turn the control to adjust the ratio of the compressor.

Installation

Remove all packing materials from the Compact 6.2. Check that all foam and plastic padding is

removed. Connect all cables.

Do not supply power before the whole system is set up and connected properly.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Follow the directions below, as they pertain to your preferred operation mode.

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 115V specification product on 230V power, or vice versa.

01) Insert a USB flash drive into the USB connector (07).

02) Turn the input source switch (05) to select USB.

03) The display will show:

01) Press the skip buttons

data will appear on the display.

02) Press and hold down the skip buttons

01) Once you have selected the desired track, press the

02) Press the

button again, to pause playback.

01) Press the

button to stop playback.

Ordercode: D2320

and

to select previous/next track. The selected track's name and time

and

to rewind/fast-forward the selected track.

button to start playback.