DAPAudio DLM-12SA Manuel de l'utilisateur - Page 15

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} DAPAudio DLM-12SA. DAPAudio DLM-12SA 16 pages.

Imprimer la page
DLM-12A / DLM-12SA

Technical Specifications

DLM-12A
System:
Coverage:
Transducer:
Driver:
Active Crossover:
Digital Presets:
Frequency response:
Max SPL @ 1m:
Power Amp:
Input 1:
Input 2:
Mix Output:
USB Control (optional):
External Control:
Electric Protection:
Handling:
Enclosure:
Dimensions (HxWxD):
Weight:
DLM-12SA
System:
Transducer:
Active Crossover:
Digital Presets:
Frequency response:
Max SPL @ 1m:
Power Amp:
Inputs:
Input level:
Full range Output:
High Pass Output:
USB Control optional:
External Control:
Electric Protection:
Handling:
Enclosure:
Dimensions (HxWxD):
Weight:

Troubleshooting

This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, unplug the device.
2.
Check the fuse, power from the wall, all cables, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If you are unable to determine the cause of the problem, do not open the device, as this may
damage the unit and the warranty will become void.
5.
Return the device to your Dap Audio dealer.
Ordercode: D3223 / D3224
2-way Active Speaker system
90° conical
12" Woofer, 2.5" voice coil
1" Exit Compression CELESTION Driver, 1.75" Voice Coil
1.85kHz-DSP Processed with 24dB slope
NORMAL / USER
45Hz-20kHz (-10dB)
128dB
High power 500W Low + 500W High
(MIC/Line) with Combo XLR/Jack
Combo XLR/Jack and RCA
Male XLR balanced
Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
Volume Control
Thermal/Convection-Fan/Overload/Digital Lim./Compressor
One standard 35mm metal pole-mount plus one handle on top
15mm poplar plywood cabinet & ABS High-strength top and bottom
protectors
414x388x365mm
18,7Kg
12" Active Subwoofer Speaker system
12" Woofer, 3" voice coil
60Hz - 120Hz-DSP Processor
NORMAL/ USER
35Hz - 200Hz (-10dB)
128dB
High power Class D 1000W
Female XLR balanced differential(stereo left/ right)
Line -4dBu
Male XLR balanced
Male XLR balanced
Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
Volume Control
Thermal/Convection-Fan/Overload/Digital Lim./Compressor
One standard 35mm metal pole-mount plus two handles
15mm poplar plywood cabinet
439x417x512mm
18,7Kg
14