DuraTrel Courtyard Arbor 11111 Instructions de montage - Page 3

Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} DuraTrel Courtyard Arbor 11111. DuraTrel Courtyard Arbor 11111 5 pages.

Imprimer la page

Lay out one left post (part 1). Insert one top/bottom cross rail (part 3) into bottom hole of post. Insert one

center cross rail (part 4) into middle hole of post. Slide five 61" tubes (part 5) through holes of center cross

rail and into bottom cross rail. Insert one top/bottom cross rail (part 3) into top 1½ x 4" hole, inserting free

ends of tubes into top rail. Insert free ends of cross rails into corresponding holes of one right post (part 2).

Slide one 24" steel ground anchor (part 10) into bottom of each post so bottom cross rail slides into U-Shape.

Using two 1¼" screws per post, screw bottom of arbor panel together. DO NOT screw together center or top

cross rails.

Remove 24" steel ground anchor from bottom of post and set aside until ready for installation.

Repeat for second arbor panel.

Courtyard Arbor