Duratuf D3 Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Duratuf D3. Duratuf D3 20 pages. Roller door opener

Press the RED O/S/C button at the bottom of door operator or K button (FIG.9), confirm the up limit

and down limit are correct. If not, please re-set the travel limit according to above processes until the

limits are correct.

5.3 CODING TRANSMITTER

The operator should be under standby mode when coding remotes. Press 'SET' button until the coding

light turns on and the operator is under remote learning mode. Press any one button two times on the

remote, the coding light will extinguish. The remote has been coded successfully. Use the same

method to code multiple remotes. Up to 20 can be stored at any one time.

Press 'CODE' button

Deleting remotes: Press the code button over 8 seconds until display shows C, then it will be under

standby mode. All stores remotes are now deleted.

Press 'CODE' button over 8 seconds

Red light turn on

Press any one

button 2 times

Display C

Light flashes

Under standby mode

Light turn off

Coding finished