DARAY MAG700 Range Manuel d'utilisation et d'installation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} DARAY MAG700 Range. DARAY MAG700 Range 16 pages. Led magnifier light
Imprimer la page3.3 Wall mounted assemblies
PivotW2
3.3.1 Considerations
Wall
Construction
Examinations
to be
undertaken
Locations of
nearest power
Pivot W3 and
W4
Wall brackets need to be true on all planes.
PivotW3
Before fixing it is important to consider the strength of the wall
and the depth of the fixings used.
Use of a building engineer or structural drawings may be
required to decide on suitability.
For correct installation it will be necessary to decide the
location of where you want the head to situate. This will be
dependent on the specific requirements of your work /
examinations, if in doubt consult the end user or DARAY.
Only the supplied certified power connection should be used
with the light.
The length of this cable is approximately 1.6m so the wall
mounted light should be within 1.3m of a mains power point
Both the Pivot W3 and W4 are primarily designed for hardwired
versions of the light.
The PivotW3 is designed to be compatible with BESA Box style
trunking (please note, reinforcement between the BESA trunking
and the wall structure may be required).
The PivotW4 incorporates a wide spreader plate with an optional
hidden cable feed point.
Use of a competent engineer as well as structural drawings may
be required to decide on suitability.
PivotW4
Page 8 of 14